AVW: Broadcast, RF and Audio Visual Equipment Wholesalers

280w Intelligent Amplifier - 16/8/4 Ohm or 70v/100v, DSP

REVNET 2140 AMP

$1,972.00

* Ex GST. Check with us for Discounts and the latest Trade pricing!

RevNetTM 2140(-D)

Here’s the “Swiss Army Knife” of small amplifiers. The RevNet™ 2140 and RevNet™ 2140-D give you the power, versatility and quality you need for both commercial and high-end residential installations. One RevNet amp will power two speakers. Units may be daisy-chained for larger applications, and the RevNet 2140-D has the added power of full Dante® compatibility with AES67 support.

Quality
Loads of headroom with 26 dB gain, coupled with the lowest distortion you’ll find on any comparable pro audio amp. Audiophile-quality RevNet amps are suitable for both pro audio and high-end HiFi operation.

Powerful
140 watts per channel (280 W in mono) will power nearly any installed speaker in the room. RevNet amps can be used in 4/8/16 Ohm or 70/100V installations

Easy to Install

Fast-wiring Phoenix connectors allow you to quickly pre-wire sources and then just plug them into the amp.

Versatile Control

Direct RVC connections along with USB, TCP/IP, WiFi or Dante make it easy to manage your audio sources and volume.

Onboard DSP for Easy Configuration

A built-in sound masking generator allows you to quickly configure the amp for corporate uses, while a 30-band EQ and RMS compressor bring you complete control over the sound of the room.

SpecificationsRevNet 2140(-D)
Configurations4/8 /16Ω or 70/100V
Power Output2x140W low-Z; 1x280W high-Z
Control OptionsWiFi, LAN, USB, Dante® (2140-D)
DSP processes/EQ30 band EQ with auto-EQ mode; RMS compressor; overflow limiter; sound masking generator
Frequency Response20Hz – 20kHz (+0/-0.25 dB)@ 8Ω
ConnectorsInput: Euroblock; Output: Euroblock
RegulatorycNEMKOus, CE, RoHS
Weight7.00 lbs (3.18 kg)
Dimensions1/2 RU 1.73” H x 11.00” W x 8.70” D (43.9mm H x 279.4mm W x 220.9mm D)

Specifications
  • 2 x 140W@16/8/4 , 100V/70V @280W
  • Phoenix connectors for Inputs/Link Output, Amp Out and RVC
  • TCP/IP and USB interfaces along with Integrated WiFi for remote control and set up
  • Built-in sound masking generator
  • 30 band fully customizable DSP
  • In-Room AutoEQ and mobile app support
  • 2 x 140W@16/8/4 , 100V/70V @280W
  • Phoenix connectors for Inputs/Link Output, Amp Out and RVC
  • Dante® (with AES67 support) and USB interfaces along with Integrated WiFi for remote control and set up

Download RevNet 2140(-D) cut sheet | Related Products